Decking screw stainless steel A2

Dimensions
Quantity
  • The fixing thread fixes the cover board
  • The small cylindrical head lies flush in the wood, achieving an appealing aesthetic finish.

This special drive is a so-called hexalobular internal. Compared to less precise-fitting drive types like Phillips or cross recess, the contact surface is many times larger with our T-STAR plus, and the T-STAR bits are always positioned optimally in the screw head. The maximum, precise force transmission from the screwdriver to the screw that results from the use of T-STAR plus thus enables simple and ultra-fast work with much more efficiency than with other drives. What this means for you: No more annoying bit slips from the screw head – you can take care of serial fastening in no time at all!

Unlike the washer head, which transfers the tensile forces of the screw onto a larger area of the wood via its large underside, the narrow cylindrical head does not need to perform this task at all. With its size, which offers just enough space for the T-STAR plus drive, the cylindrical head can be completely countersunk into the wood, thus enabling simple, virtually invisible screw connections. The tensile forces exercised on a screw in wood construction are completely transferred to the wood via the full thread of the cylindrical head screws. If cylindrical head screws are installed horizontally, for instance decking screws on wooden decking, they can only be inserted flush in order to prevent water from gathering in the screw hole and damaging the wood. What this means for you: Even heavy-duty wood connections can be virtually invisible!

The fixing thread is a two-part thread featured on some SPAX screws. It consists of a main thread, which inserts into the substructure, and another thread below the head. The thread below the head is separated from the main thread by a short section of smooth shank, and ensures that the board remains securely in place on the substructure in all weather conditions. The smooth shank between the thread parts absorbs the movements of the board. What this means for you: No more re-fastening wooden boards that have become loose or creak too much!

The CUT point on our SPAX screws enables the ultra-fast and effective insertion of our wood screws without pre-drilling. In combination with the serrations, the arrow-shaped CUT point reduces wood splitting and tearing. The CUT point also enables extremely precise and sturdy setting of the screw tip on smooth surfaces. What this means for you: You can skip an entire work step, since pre-drilling is no longer required for most woods. Saves both your screwdriver battery and your own energy – no more annoying slipping on smooth wood and derived timber products.

With our stainless-steel screws, the abbreviation A2 refers to the alloy of the steel. ""A"" stands for austenite, a mix of iron and carbon with the alloying elements chrome, nickel and molybdenum. The 2(1-5) describes the alloy grade, in other words, the chrome and nickel content. Screws made of stainless steel A2 offer a high level of protection against corrosion and medium strength, However, they have low resistance to saltwater and acids. They are therefore a reliable, durable choice for outdoor applications in non-coastal areas. What this means for you: With our stainless steel A2 screws, you are optimally equipped for corrosion-resistant fastening in virtually all non-coastal construction projects.

The typical SPAX T-STAR plus drive is a so-called hexalobular internal. This shape increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work with much more efficiency than with other drives.

The fixing thread consists of a main thread, which inserts into the substructure, and another thread below the head. This thread below the head ensures that the board remains securely in place on the substructure in all weather conditions. The smooth shank between the thread parts absorbs the movements of the board. No more re-fastening wooden boards that have become loose or creak too much!

The CUT point on our SPAX screws enables the ultra-fast and effective insertion of our wood screws without pre-drilling. In combination with the serrations, the arrow-shaped CUT point reduces wood splitting and tearing. The CUT point also enables extremely precise and sturdy setting of the screw tip on smooth surfaces.

With our stainless-steel screws, the abbreviation A2 refers to the alloy of the steel. Screws made of stainless steel A2 offer a high level of protection against corrosion and medium strength. However, they have low resistance to saltwater and acids. They are therefore used in outdoor applications in non-coastal areas.

Table
Document Type Format
SPAX Outdoor Decking Flyer PDF
Outdoor brochure PDF
Please select the desired dimensions and quantity to see information here.

This special drive is a so-called hexalobular internal. Compared to less precise-fitting drive types like Phillips or cross recess, the contact surface is many times larger with our T-STAR plus, and the T-STAR bits are always positioned optimally in the screw head. The maximum, precise force transmission from the screwdriver to the screw that results from the use of T-STAR plus thus enables simple and ultra-fast work with much more efficiency than with other drives. What this means for you: No more annoying bit slips from the screw head – you can take care of serial fastening in no time at all!

Unlike the washer head, which transfers the tensile forces of the screw onto a larger area of the wood via its large underside, the narrow cylindrical head does not need to perform this task at all. With its size, which offers just enough space for the T-STAR plus drive, the cylindrical head can be completely countersunk into the wood, thus enabling simple, virtually invisible screw connections. The tensile forces exercised on a screw in wood construction are completely transferred to the wood via the full thread of the cylindrical head screws. If cylindrical head screws are installed horizontally, for instance decking screws on wooden decking, they can only be inserted flush in order to prevent water from gathering in the screw hole and damaging the wood. What this means for you: Even heavy-duty wood connections can be virtually invisible!

The fixing thread is a two-part thread featured on some SPAX screws. It consists of a main thread, which inserts into the substructure, and another thread below the head. The thread below the head is separated from the main thread by a short section of smooth shank, and ensures that the board remains securely in place on the substructure in all weather conditions. The smooth shank between the thread parts absorbs the movements of the board. What this means for you: No more re-fastening wooden boards that have become loose or creak too much!

The CUT point on our SPAX screws enables the ultra-fast and effective insertion of our wood screws without pre-drilling. In combination with the serrations, the arrow-shaped CUT point reduces wood splitting and tearing. The CUT point also enables extremely precise and sturdy setting of the screw tip on smooth surfaces. What this means for you: You can skip an entire work step, since pre-drilling is no longer required for most woods. Saves both your screwdriver battery and your own energy – no more annoying slipping on smooth wood and derived timber products.

With our stainless-steel screws, the abbreviation A2 refers to the alloy of the steel. ""A"" stands for austenite, a mix of iron and carbon with the alloying elements chrome, nickel and molybdenum. The 2(1-5) describes the alloy grade, in other words, the chrome and nickel content. Screws made of stainless steel A2 offer a high level of protection against corrosion and medium strength, However, they have low resistance to saltwater and acids. They are therefore a reliable, durable choice for outdoor applications in non-coastal areas. What this means for you: With our stainless steel A2 screws, you are optimally equipped for corrosion-resistant fastening in virtually all non-coastal construction projects.

Please select the desired dimensions and quantity to see information here.

The typical SPAX T-STAR plus drive is a so-called hexalobular internal. This shape increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work with much more efficiency than with other drives.

The fixing thread consists of a main thread, which inserts into the substructure, and another thread below the head. This thread below the head ensures that the board remains securely in place on the substructure in all weather conditions. The smooth shank between the thread parts absorbs the movements of the board. No more re-fastening wooden boards that have become loose or creak too much!

The CUT point on our SPAX screws enables the ultra-fast and effective insertion of our wood screws without pre-drilling. In combination with the serrations, the arrow-shaped CUT point reduces wood splitting and tearing. The CUT point also enables extremely precise and sturdy setting of the screw tip on smooth surfaces.

With our stainless-steel screws, the abbreviation A2 refers to the alloy of the steel. Screws made of stainless steel A2 offer a high level of protection against corrosion and medium strength. However, they have low resistance to saltwater and acids. They are therefore used in outdoor applications in non-coastal areas.

Please select the desired dimensions and quantity to see information here.

Table
Please select the desired dimensions and quantity to see information here.

Document Type Format
SPAX Outdoor Decking Flyer PDF
Outdoor brochure PDF
Please select the desired dimensions and quantity to see information here.

Please select the desired dimensions and quantity to see information here.



We help with the choice of screws

Find the right screw for your project – with our screw consultant

For every challenge, SPAX has a screw that is up to it:
Find exactly the fastener your project needs with our screw consultant. With a few clicks you can find the right screw for your application.


Discover the world of SPAX


SPAX connects - our assortment at a glance



We are here for you!

Do you have questions that can only be answered personally?
 

+49 2333 799-0
 

Or use our contact page